Gledhill Economy 7 Direct Vented Combination Cylinders

Direct Cylinder - Heated by an electric immersion heater & solar coil. Not suitable for connection to a Boiler.

Open Vented - Conventional Cylinder, fed by a ;header tank in the loft.

The combination cylinder is specifically designed to be installed into properties without a loft space ie apartments etc. With the feed tank being incorporated into the combination unit, a separate cold water storage tank is not required, therefore installation is simplified and costs reduced.

Gledhill Economy 7 Direct Vented Hot Water Cylinders at PlumbNation are a range of electrically heated traditional vented hot water cylinders designed to make the most of electric off-peak tariffs. Gledhill Vented Cylinders are desgined to supply hot water for single or multi bathroom properties and are available in standard capacities from 120 litre to 210 litre.

• Supplied complete with factory fitted cold water inlet baffle to improve hot water draw off
• EnviroFoam insulation - environmentally friendly
• Re-heat time of 25 minutes
• 2 immersions
• Incredibly light - weighing as low as 12kg (smaller models)
• Compliant with 2010 Part L Building Regulations
• 100% recyclable
• Low standing heat loss
• Wide range of sizes available
• Fast delivery
• 10 Year Manufacturers Guarantee

Image is for illustrative purposes only. Product may differ slighty from image.

Insulation adds 70mm to the diameter of the Cylinder.

Please note - Vented Cylinders are not supplied with an immersion.

Picking the most suitable sort of Cylinder is an important decision. After you determine that Direct Combination Cylinders deliver the right solution then the Gledhill Economy 7 FT120 Direct Vented EnviroFoam 1200mm x 450mm Combination Cylinder 120/40 Litre - BEDCT01 is without doubt worth a serious look.